Cleaning
How to Clean a Dryer Vent (Step-by-Step)
Clear lint from your dryer vent duct and exterior hood in about an hour — the tools you need, the exact steps, and the warning signs that it's overdue.
A dryer that suddenly needs two cycles to dry a load usually isn't broken — it's suffocating. Lint slips past the lint screen every cycle and builds up inside the vent duct, which slows airflow, wastes energy, and creates a real fire risk.
The good news: cleaning the vent is one of the easiest maintenance jobs in the house. With a brush kit and a vacuum, most people finish in about an hour.
Before you start
Measure roughly how far your vent travels from the dryer to the outside wall, and count the bends. That tells you how long a brush kit you need — our roundup of dryer vent cleaning kits compares kits by reach and how they're driven.
Related jobs
While you're in the laundry room, clean the washing machine too — a musty washer makes even dry clothes smell. If you found a nest in the vent hood and suspect rodents are getting inside, see how to get rid of mice.
Step by step
- 1
Unplug the dryer (and shut off the gas)
Pull the plug from the wall. For a gas dryer, turn the shutoff valve on the gas line so the handle sits crosswise to the pipe. Don't disconnect the gas line itself — you only need to slide the dryer forward.
- 2
Clean the lint screen and its slot
Remove the lint screen and wash it with warm soapy water if it looks waxy from dryer sheets. Then vacuum down inside the screen slot with a crevice tool or a long lint-trap brush — lint packs in here more than people expect.
- 3
Pull the dryer out and disconnect the transition duct
Slide the dryer 2–3 feet from the wall, taking care not to kink the gas line or crush the duct. Loosen the clamp on the back of the dryer and the one at the wall, then pull the transition duct off both ends.
- 4
Vacuum the dryer's exhaust outlet
Reach into the exhaust port on the back of the dryer with the vacuum hose and remove any lint you can reach. A flashlight helps you see buildup inside the outlet.
- 5
Brush the wall duct from the inside
Feed the brush into the wall duct, adding rod sections as you go. If your kit is drill-driven, spin the drill clockwise only at low speed — reversing can unscrew the rods inside the duct. Work the brush in and out a few times, then pull it back and vacuum the lint that comes with it.
- 6
Clean the exterior vent hood
Go outside and open or remove the vent cover. Pull out lint by hand, brush the opening, and make sure the flap or louvers swing freely. If birds or rodents have nested, remove the nest and add a dryer-rated vent guard — never a fine screen, which traps lint.
- 7
Brush from the outside in (for long runs)
If the run is long or has several elbows, push the brush in from the exterior end too. Lint will come out of the indoor end, so have the vacuum ready or lay down a drop cloth.
- 8
Inspect and replace the transition duct if needed
The short duct between dryer and wall should be rigid or semi-rigid metal. If yours is white vinyl or thin foil, replace it — those types crush easily and are not recommended by dryer manufacturers. Keep it as short and straight as you can.
- 9
Reconnect, seal and test
Reattach the duct at both ends with clamps. Seal joints on rigid duct with foil tape, never screws (screws snag lint). Push the dryer back without crushing the duct, restore gas and power, and run the dryer on air-only for 10 minutes. You should feel strong airflow at the outside hood.
Common mistakes
- Using plastic or foil accordion duct behind the dryer — it sags, traps lint and can crush closed.
- Fastening duct joints with sheet-metal screws, which stick into the airflow and catch lint.
- Running a drill-driven brush counterclockwise and leaving rod sections stuck in the wall.
- Putting a screen over the exterior vent opening — lint clogs it within weeks.
- Only cleaning the lint screen and assuming the duct is fine.
Frequently asked questions
How often should you clean a dryer vent?
At least once a year for most households. Clean it every 6 months if you do a lot of laundry, have pets, or have a long vent run with several bends.
What are the signs a dryer vent is clogged?
Clothes taking longer than one cycle to dry, the dryer or laundry room getting unusually hot, a burning smell, lint collecting around the door or outside hood, and a vent flap that barely opens while the dryer runs.
Can a clogged dryer vent cause a fire?
Yes. Lint is highly flammable, and a blocked vent traps heat. Fire safety agencies list failure to clean dryers as a leading cause of home dryer fires, which is why yearly vent cleaning matters.
Can I clean a dryer vent with a leaf blower?
It can push loose lint out of a short, straight run, but it won't scrub packed lint off the duct walls and can blow debris back into the dryer. A rotary brush kit followed by a vacuum does a far more thorough job.
When should I hire a professional dryer vent cleaner?
Hire a pro if the vent runs through the roof, is longer than your brush kit can reach, you find a crushed or disconnected duct inside a wall, or the dryer still dries slowly after you've cleaned everything you can reach.
Related guides
- GuideHow to Clean an AC Unit (Outside Unit, Coils and Filter)Clean your central air conditioner's outdoor condenser, coils, filter and condensate drain safely — plus quick steps for window units — so it cools better and runs efficiently.
- GuideHow to Fix a Water Heater (No Hot Water, Leaking, Pilot Light)Troubleshoot a tank water heater by symptom — no hot water, lukewarm water, leaks and a pilot that won't stay lit — with safe fixes and clear signs it's time to call a pro.
- GuideHow to Clean a Nespresso MachineKeep your Nespresso OriginalLine or Vertuo brewing hot, fast and tasty — daily and weekly cleaning, the rinse cycle, how to descale, how often, and how to clean the Aeroccino frother.