Skip to content

Free Tools · Time

Time Calculator

Add and subtract hours, minutes and seconds, find the hours between two clock times, fill in a weekly timesheet, or work out time and a half — with results in both hours:minutes and decimal hours.

Start

Total

4:15:30

4.2583 hours · 255.5 minutes · 15,330 seconds

How the time calculator works

Time doesn't add like ordinary decimals because there are 60 minutes in an hour and 60 seconds in a minute. The calculator sidesteps that by turning everything into seconds (or minutes), doing ordinary arithmetic, and converting back:

  • Total seconds = hours × 3,600 + minutes × 60 + seconds
  • Hours = total ÷ 3,600 (whole part), minutes = what's left ÷ 60, seconds = the remainder
  • Decimal hours = total seconds ÷ 3,600

Add or subtract time

Enter a starting duration, then add or subtract as many more as you like. Results can go past 24 hours (shown in days too) or below zero, so it works for video lengths, race splits, flight times and project hours alike.

Hours between two times

The calculator subtracts the start time from the end time in minutes. If the end is earlier than the start, the period crosses midnight and 24 hours (1,440 minutes) is added. Any unpaid break is then subtracted:

Hours worked = (end − start, +24 h if overnight) − break

Timesheet calculator

Each day works like the hours-between calculator. The days are added for a weekly total in hours:minutes and decimal hours. Enter an hourly rate to see gross pay; with the overtime box ticked, hours over 40 are paid at 1.5 × the rate, matching the federal workweek rule. Leave days you didn't work blank.

Time and a half calculator

Time and a half rate = hourly rate × 1.5. Overtime pay = overtime hours × that rate, and total pay = regular hours × rate + overtime pay. Under the US Fair Labor Standards Act, non-exempt employees are owed at least time and a half for hours over 40 in a workweek. Exempt employees (many salaried professional, administrative and executive roles) aren't covered by that rule, and some states have stricter daily overtime laws. Results are gross pay before taxes — see the paycheck calculator for take-home pay.

Worked examples

Example 1: Adding 2:45:00 and 1:30:30

In seconds: 2:45:00 = 2 × 3,600 + 45 × 60 = 9,900 and 1:30:30 = 3,600 + 1,800 + 30 = 5,430. The sum is 15,330 seconds. 15,330 ÷ 3,600 = 4 hours with 930 seconds left; 930 ÷ 60 = 15 minutes with 30 seconds left. Total: 4:15:30, or 4.2583 hours.

Example 2: An overnight shift

A shift runs from 10:00 PM to 6:30 AM with a 30-minute unpaid break. In minutes after midnight that's 1,320 to 390. The end is earlier, so add 1,440: 390 + 1,440 − 1,320 = 510 minutes. Subtract the break: 510 − 30 = 480 minutes = 8:00 hours (8.00 decimal).

Example 3: Time and a half on a 46-hour week

At $20.00 an hour, the time and a half rate is 20 × 1.5 = $30.00. With 46 hours worked, 40 are regular (40 × $20 = $800.00) and 6 are overtime (6 × $30 = $180.00). Gross pay for the week is $980.00.

Frequently asked questions

How do I convert hours and minutes to decimal hours?

Divide the minutes by 60 and add them to the hours. 7 hours 45 minutes is 7 + 45 ÷ 60 = 7.75 hours. Common values: 15 min = 0.25, 30 min = 0.5, 45 min = 0.75, 20 min ≈ 0.33. Payroll usually needs decimal hours, so the calculator shows both.

How do I calculate hours worked across midnight?

If the end time is earlier than the start time, the shift crosses midnight, so add 24 hours to the end time before subtracting. A shift from 10:00 PM to 6:30 AM is (6:30 + 24:00) − 22:00 = 8 hours 30 minutes. The calculator does this automatically.

What is time and a half?

Time and a half is 1.5 times your regular hourly rate. At $20 an hour, time and a half is $30 an hour. Under the US Fair Labor Standards Act (FLSA), non-exempt employees must be paid at least time and a half for hours worked over 40 in a workweek.

Is overtime calculated per day or per week?

Federal law (the FLSA) uses the workweek: overtime starts after 40 hours in a fixed 7-day period, no matter how long any single day is. Some states add daily rules — California, for example, generally requires overtime after 8 hours in a day. Check your state's labor department for the rules that apply to you.

Should breaks be subtracted from hours worked?

Unpaid meal breaks are usually subtracted, which is why each row has a break field. Under federal rules, short rest breaks (typically 5 to 20 minutes) are generally counted as paid work time, while bona fide meal periods of 30 minutes or more when you're fully relieved of duty usually aren't. Only enter breaks that are unpaid.

How do I add up hours and minutes by hand?

Add the hours and minutes separately, then carry every 60 minutes into an hour. For 2:45 + 1:50: hours 2 + 1 = 3, minutes 45 + 50 = 95 = 1 hour 35 minutes, so the total is 4:35.